Smoke Alarm Installation Sydney — NSW-Compliant Photoelectric Alarms
NSW law requires a working photoelectric smoke alarm on every storey, and rental properties must have them interconnected and tested annually. Landlord notices, strata audits and pre-sale inspections all check it - we install compliant 240V hardwired alarms and provide the certificate.
Emergency Service Available
Rapid response from licensed local tradespeople
Available now — call anytime







How Our Smoke Alarm Installation Service Works in Sydney
Compliance Assessment
We inspect your current smoke alarms, assess whether they meet current NSW legislation, and identify what's needed to achieve full compliance.
Plan Alarm Locations
We determine the required alarm locations based on your home's layout — every level, every bedroom, and connecting hallways as required by law.
Professional Installation
Our licensed electricians install hardwired, interconnected photoelectric smoke alarms with battery backup at every required location.
Test & Certify
We test every alarm individually and as an interconnected system, verify all alarms sound together, and provide a compliance certificate.
About Our Smoke Alarm Installation Service in Sydney
NSW Environmental Planning and Assessment Regulation 2021 (cl 146) requires every residence - owner-occupied, rental and strata - to have working smoke alarms on every storey, in every bedroom, and in hallways serving bedrooms. Rental properties must have them interconnected (one alarm triggers them all) and the landlord is legally required to test annually and replace within 2 business days of becoming aware of a fault. Strata schemes carry the same obligation for common-property alarms. Standalone 9V battery alarms - even new ones - don't meet the interconnection requirement for rentals or two-storey homes.
Tradetek installs only photoelectric alarms compliant with AS 3786:2014 - Fire & Rescue NSW specifically recommends photoelectric over ionisation because they detect the slow smouldering fires (couch cushions, electrical insulation) that kill most NSW victims, hours earlier than ionisation alarms. We use Brooks, Quell and Clipsal/PDL hardwired 240V interconnected alarms with 10-year sealed lithium battery backup - the configuration that passes every NSW rental inspection, strata audit and pre-sale building report.
Sydney 2026 pricing: single 240V photoelectric alarm replacement (existing wiring in place) from $189; full home upgrade from battery-only to 240V interconnected, 2-storey 3-bedroom Sydney house typically $590-$890 supplied and installed (3-4 alarms); 10-year sealed lithium interconnected (no mains wiring required, ideal for older homes where wall sheeting can't be opened) $145 per alarm installed. Strata and multi-dwelling jobs quoted on site.
Every install includes: positioning per AS 3786 (300mm minimum from corners, ceiling-centre preferred, away from kitchen and bathroom steam), interconnect commissioning (button-test that triggering one alarm sounds all), labelling, decommissioning of any superseded ionisation units, and a written compliance certificate suitable for rental managing agents, strata committees and conveyancers.
Coverage: all Sydney metro, Northern Beaches, North Shore, Eastern Suburbs, Inner West, Hills District, Sutherland Shire, the Central Coast and Newcastle. NSW licensed electrical contractor (Lic. 388103C). Same-week appointments standard; rental/strata urgent compliance jobs prioritised within 48 hours when a notice has been served.
Whether you searched for smoke alarm sydney cost, interconnected smoke alarms sydney or photoelectric smoke alarm sydney, Tradetek Solutions handles the job end to end across Sydney, the Central Coast and Newcastle. Call 0488 822 794 to book a licensed team today.
What Our Smoke Alarm Installation Service Covers
Why Choose Tradetek for Smoke Alarm Installation in Sydney
NSW EPA Reg 2021 Compliant
Photoelectric AS 3786:2014, interconnected for rentals and 2-storey homes - the spec NSW Fair Trading rental inspections actually pass.
Photoelectric, Fire & Rescue NSW Recommended
Brooks, Quell and Clipsal PDL photoelectric - detect smouldering fires hours earlier than ionisation, which Fire & Rescue NSW advises against.
Certificate Included
Written compliance certificate for managing agents, strata committees and conveyancers - and we update your switchboard schedule too.
240V Mains or 10-Year Sealed Lithium
Mains hardwired with battery backup for new wiring, or 10-year sealed lithium for older homes - both interconnected, both NSW compliant.
Smoke Alarm Installation Sydney — Frequently Asked Questions
Related Electrical Services in Sydney
Safety Switch Installation
Professional safety switch (RCD) installation to protect your family from electrical shock. Required by law on all power and lighting circuits in NSW.
View Safety Switch InstallationElectrical Fault Finding
Expert electrical fault finding and diagnostics across Sydney. We identify and resolve tripping circuits, power outages, flickering lights, and all electrical issues.
View Electrical Fault FindingPower Point Installation
Professional power point installation, relocation and upgrades across Sydney. Including USB power points, outdoor weatherproof outlets, and smart power points.
View Power Point InstallationLight Installation
Professional light fitting installation across Sydney — downlights, pendants, chandeliers, feature lights, and more. Expert wiring and clean, precise mounting.
View Light Installation