24/7 Emergency Service Available 0488 822 794

    Burst Pipe Repair - 24/7 Response in 60 Minutes, Fixed Repairs

    A burst copper line or failed kitchen flexi hose puts 800-1,200 litres an hour through your floor and ceiling. Shut the mains, then call - we're on most doorsteps inside an hour with the parts to permanently fix it, not just stop it.

    Available 24/7 across Sydney, Central Coast & Newcastle — 0488 822 794
    Tradetek team working on roof with safety harnesses
    Tradetek technicians setting up ladder
    Tradetek plumber inspecting pipes
    Tradetek roofer on rooftop with harbour view
    Tradetek plumber fixing kitchen sink
    Tradetek technician cleaning gutters with vacuum
    Tradetek worker inspecting gutter line

    How It Works

    1

    Emergency Call

    Call our 24/7 emergency line. We'll guide you on shutting off the water mains to minimise damage while our plumber is en route.

    2

    Rapid Arrival

    Our nearest available plumber arrives promptly with a fully equipped vehicle to handle any pipe type or size.

    3

    Repair or Replace

    We cut out the damaged section and replace it with quality materials, ensuring a permanent, code-compliant repair.

    4

    Inspect & Advise

    We check surrounding pipework for vulnerabilities and advise on any preventive measures to avoid future bursts.

    About This Service

    Burst pipes in Sydney homes follow predictable patterns. Failed braided flexi hoses under kitchen sinks and vanities account for around 22% of all internal water claims handled by IAG/Suncorp - the rubber liner ruptures at the crimp after 5-10 years. Frozen burst in upper North Shore and Blue Mountains laundries on July mornings. Copper pinholes from chloride attack in 1970s-1990s mains. PB (Pluto) pipe failures in homes built 1985-1995 - the plastic embrittles and cracks at fittings. Galvanised mains in pre-1970 homes rusting through from the inside. We see the same five failures every week and stock the parts for all of them.

    On arrival we isolate the failed section, drain the line, then make a permanent repair using the correct material for the existing system - silver-soldered copper for copper mains, push-fit or crimped brass for PEX, full WaterMark-compliant flexi hoses with stainless braid for fixtures. We don't slap a Sharkbite on a copper main and call it done. Where the underlying pipe is at end of life (galvanised, early PB, badly degraded copper), we quote both an emergency repair and a planned full replacement so you can budget the second job rather than discover it during the next failure.

    Sydney 2026 burst pipe pricing: 24/7 callout from $289 (includes first 30 min on site, mains isolation, leak detection); standard flexi hose replacement under sink/vanity from $245; copper pipe repair (silver soldered, up to 1m) from $385; underground mains burst between meter and house from $890 (depending on depth and surface). Every quote is written, fixed and presented before work starts - including out-of-hours. Where the burst is on the Sydney Water side of the boundary meter, we prove it with electronic gauge testing and you don't pay - it's their repair.

    After the repair we run a 30-minute static pressure test to confirm there are no secondary leaks elsewhere on the line, photograph the failed component (critical for insurance), and provide a written invoice with brand, model, age and cause - the documentation IAG, Suncorp, QBE, Allianz and Youi accept without further inspection for sudden-loss claims.

    Coverage: all of Sydney metro, Northern Beaches, North Shore, Eastern Suburbs, Inner West, Hills District, Sutherland Shire, the Central Coast and Newcastle. 60-90 minute average response across Sydney metro, 24/7/365. While you wait: shut the main at the front boundary stop tap (clockwise), and switch off the hot water unit's circuit at the switchboard if the burst is on the hot water side.

    What We Do

    24/7 emergency burst pipe repair
    Copper, PEX, PVC, and galvanised pipe repairs
    Ceiling and wall burst pipe access and repair
    Underground burst pipe location and repair
    Temporary and permanent repair solutions
    Water damage mitigation advice
    Pipe insulation to prevent future bursts
    Full re-piping for properties with aged pipework

    Why Choose Us

    60-Minute Sydney Metro Response

    Average 45-90 minutes from call to on-site, 24/7 - including Christmas and Anzac Day across Sydney metro.

    Permanent Repair, Not a Patch

    Silver-soldered copper, WaterMark crimped PEX, stainless braided flexi hoses - we repair to spec, not slap a Sharkbite on and run.

    Insurance-Ready Documentation

    Photos, brand, model, age and written cause statement - the package IAG, Suncorp, QBE, Allianz and Youi accept for sudden-loss claims.

    Honest On Sydney Water Boundary

    If the burst is between the council main and your boundary meter, we prove it with gauge testing - it's their repair, not your bill.

    Frequently Asked Questions

    Need Burst Pipe Repair?

    Contact us today for a free, no-obligation quote. Fast response times guaranteed.